C4FM repeater Yaesu DR-2
Welcome to our DMR TG 2501
 
Yaesu DR-2

The Yaesu DR-2 repeater operates on the basis of the System Fusion. The Yaesu DR-2 repeater operates in FM / C4FM mode by recognizing them thanks to AMS function. The signal in C4FM obtains high sound quality ensuring stable connectivity. Thanks to the support of traditional FM modulation, it provides further connectivity for traditional transceivers that do not support digital modulation. Marking DR-2XE repeaters means the European and Australian markets and DR-2X means American and Chinese.

Yaesu DR-2 includes support for these new important features:
- IMRS - allows multiple DR-2 repeaters connect to over the Internet.
- Digital Group ID - a way of separating users into up to 99 talk groups.
- Digital Personal ID, which is a selective calling system to allows a user to call another user based on their call sign.

The Yaesu DR-2 repeater can be used on 2m (144-146MHz) and 70cm (430-440MHz) with two receivers simultaneously, also as crossband repeater.

The Yaesu DR-2 requires 13.8V, max. 15A for operation. The repeater has an internal loudspeaker for local checking, also a microphone can be plugged in for testing the transmitter.

Yaesu DR-2

Yaesu DR-2 price ≈ $1500

Yaesu DR-2 specifications:

• AMS - function automatically recognizes C4FM or FM
• Better Bit Error Rate C4FM provides Quality and Clear Voice
• 12.5 kHz bandwidth system provides high-speed data communication
• Snapshot - allows you to enjoy image data with time and GPS information
• Digital Group Monitor (GM) Function
• Smart Navigation Function
• 3.5-inch Full Color Touch Panel Operation
• High Stability ±2.5 ppm TCXO included
• DSQ (Digital Squelch Code) Signaling feature
• CTCSS and DCS Signaling feature
• ID announcement feature (Voice Mode: Requires FVS-2)
• CWID/Voice announcements with stripped PL Tones

• Frequency Range: 144-146 MHz, 430-440 MHz
• Channel pattern: 5/6.25 kHz
• Impedance: 50 Ω
• Power supply: 11.7 – 15.8 V DC
• Power consumption: 1.5 A (RX) , 13 A (50 W TX, 144 MHz) , 14 A (50 W TX, 430 MHz)
• Temperature range: -20 °C – +55°C
• Dimensions: 482 mm × 88 mm × 380 mm
• Weight: 8.4 kg
• Transmit power: 5,20,50 W
• Mode: F1D, F2D, F3E, F7W (4FSK, C4FM)
• Spurious emission suppression: > 60 dBc
• Receiver system: Double Superhet
• Intermediate Frequency: 1st: 47.25 MHz, 2nd: 450 kH
• Sensitivity: 0.3 µV (Digital 2 m/70 cm) BER 1% , 0.2 µV (FM 2 m/70 cm) 12 dB SINAD
• Adjacent Channel Selectivity: > 65 dBc (typ., 20 kHz offset)
• Selectivity FM: 12 kHz/35 kHz (-6 dB/-60 dB)
• Intermodulation distortion: < 65 dB (typ., 20 / 40 kHz offset)
• Max. Audio power: 4 W (4ohm., THD 10%, 13.8 V)

Yaesu DR-2 digital manuals

DR-2X/XE Operating Manual (2002H-DS-1) ( 12.86 MB )

Yaesu DR-2 digital manuals

IMRS (Internet-linked Multi-site Repeater System) Setup Software Instruction Manual ( 4.70 MB )

Software and firmware for Yaesu DR-2

DR-2X/DR-2XE Firmware Update (RX-Unit: MAIN Ver. 1.58 / DSP Ver. 5.03) 11-18-20 ( 5.69 MB )

Software and firmware for Yaesu DR-2

DR-2X/DR-2XE Firmware Update Information 11-18-20 ( 33.52 KB )

Software and firmware for Yaesu DR-2

IMRS (Internet-linked Multi-site Repeater System) Setup Software and Driver 9/18/17 ( 2.40 MB )

Software and firmware for Yaesu DR-2

Installation Instructions for the DR-2X/XE RX-UNIT and DSP firmware (1711-A) ( 1.47 MB )

Yaesu DR-2 accessories


FVS-2 - voice module

MH-48A6J - DTMF mic

CT-175 - Data Cable

MH-42C6J - Mic

 
© 2018-2020 UA6LQP